Jiaxing Split Pressure Solar Water Heater For Europe Market

Split Pressure Solar Water Heater 1.Certificate:CE,Solar keymark ,SRCC,ISO,SGS,CCC 2.Best performance 3.Warranty time :5years

 

(CE,Solar Keymark,SRCC)Split Pressure Solar Water Heater

 

 

Our Company Introduction :

Haining Sanneng Solar Energy Water Heater Factory is located in Haining China, our company  was established in 2008 .Wespecialized in solar application technique development. We integrate manufacturer and distributor. Established in 1997, our main products are solar powered water heaters, which are highly recommended by environmentalists.

 

 

The composition of the  split pressure solar water heater :

The split pressure solar water heater is a split systerm , where the collector is separated from the storage tank . It is flexible assemly combined with building perfectly . The system consists of storage tank , solar collector and working stations . 

 

The principle of the split pressure solar water heater : 

The heat exchanger models can be used for houses which have been already equipped with other energy sources (e.g.gas,boiler etc).When the weather is cloudy or raining for a period of time , the water can be heated by upper heat exchangeer sourced by other energy . All the storage tanks should be tested as tested pressure of 1.2 MPa (12bar) and the working pressure is 0.6MPa (6 bar) . The daily efficiency is over or equal to 55% .

Solar collector gathers energy and heat the medium material in the copper pipe , the medium transfers the heat to the water in pipeline the solar collector . When there is temperature difference (settled by customers ) between the two sensors in collector and tank respectively , intelligence controller activates the circulation pump automatically , and forces the flow of heat medium in the pipeline and do heat exchange with the water inside the tank via copper coil in  the storage tank . In case the temperature of the water tank does not reach T-max , then start the auxiliary heating device .

The characteristics of the split pressure solar water heater :

1.The collector and the water tank are separated ,and the systerm runs under the forced pressure.

2.The controlling device is specialized , so the system runs automatically .

3.The water tank can be installed anywhere .

4.The heat pipe vacuum tube collector is two circuit system ,free of freezing and could be used all year .

5.The metal super-conducting vacuum heat collector is used ,no water in the tube ,no bursting and could be used as usual under minus 50 Degrees Celsius .

6.The water tank applies with the enamel internal bladder ,runs under pressure .

7. Provide the water at the same temperature, set the highest temperature, heat the water at set point by electricity ,protecting the data when power off ,supply the tot water 24 hours a day .

8.The system is designed separately ,in harmony with the structure .

9.The heat collector could be mounted on the balcony veranda,the southem wall ,sloping roof or awning .

10.The system is designed as unit , convenient to transport .

 

Advantage:

1.15 years domestic ,5 yesrs foreign solar water heater sale experience2.Certificate:CE,ISO9000-2008,SRCC,Solar keymark,SGS,CCC3.Life span:Approximate 15 years

4.We can customize according to customers' requirement

  

 

 

 

 

 

 

 

 

Certificates :CE,ISO9001,SRCC,Solar keymark,CCC,SGS,CCC

 

 

 

 

Remark :

1.Minimum order quantity :1set

2.FOB Price:$640~1560( direct factory price)

3.Port :Shanghai/Ningbo

4.Payment Terms:  : L/C  *T/T  * Western Union  *  Cash

5.Supply ability :6000sets /Month

6.Delivery time : within 15 days

7.Packing : Standard export cartons packing for container / Samples packing with wooden case

8.Sample provide

9.OEM provide

10.24 hours service

We have 15 years manufacture solar water heater experiences in China .Hope to cooperate with you